96 | Installation
Storage system | Installation manual
6.34:
Screw in and tighten the screws on the outside of
the side panel
8. Repeat steps 1 to 6 for the other side panel
■
The side panels have been installed.
6.15.3 Fitting the housing cover
▶
Procedure
1. Use the 8 mm spanner to secure the earthing cable
to the housing cover and the housing with an M5
hex nut (tightening torque 2.5 Nm + 0.2 Nm max.)
English
Bosch Power Tec GmbH