Bosch BPT-S 5 Hybrid Installation Manual page 216

72 | Installation
Storage system | Installation manual
Info
Observe the maximum tightening torques stated in
the appendix (Tightening torques overview, p. 139)
3. Use the 10 mm spanner to screw on and tighten
the four M6 hex nuts and washers on the battery
cover (tightening torque 2.7 Nm)
4. Earth the battery cover with an earthing cable
Screw the battery cover in place (1) and (2)
6.14:
■
The battery cover is installed.
English
(1)
(2)
Bosch Power Tec GmbH