Update Boot Code; Delete Operational Code - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Update Boot Code

Use option 8 to update the boot code in the flash memory. This option is only valid after loading new boot code
using Boot Menu option 4. User action is confirmed with a Y/N question before executing the command.
To download software from the Boot menu:
1. On the Boot menu, select 8 and press <Enter>.
The following prompt displays:
Do you wish to update Boot Code? (y/n) y
Erasing Boot Flash.....Done.
Wrote 0x10000 bytes.
Wrote 0x20000 bytes.
Wrote 0x30000 bytes.
Wrote 0x40000 bytes.
Wrote 0x50000 bytes.
Wrote 0x60000 bytes.
Boot code updated
2. The bootup process resumes.

Delete Operational Code

Use option 9 to delete the active image from the flash memory. User action is confirmed with a Y/N question
before executing the command.
To delete the backup image from the Boot menu:
1. On the Boot menu, select 8 and press <Enter>.
The following prompt displays:
Are you SURE you want to delete operational code : image2 ? (y/n):y
Operational code deleted...
[Boot Menu]
2. The bootup process resumes.
D-Link
Oct. 2015
Booting the Switch
Unified Wired and Wireless Access System
Page 54