Virtual Router Configuration; Figure 211: Virtual Router Configuration; Table 192: Virtual Router Configuration Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Virtual Router Configuration

Use the Virtual Router Configuration page to create a new virtual router or to configure an existing one.
To display the page, click LAN > L3 Features > VRRP > Virtual Router Interface in the navigation tree.
Field
VRID
VRID
Interface
Pre-empt Mode
Accept Mode
D-Link
Oct. 2015

Figure 211: Virtual Router Configuration

Table 192: Virtual Router Configuration Fields

Description
Select Create from the menu to configure a new Virtual Router, or select one
of the existing Virtual Routers, listed by interface number and VRID.
This field is only configurable if you are creating new Virtual Router, in which
case enter the VRID in the range 1 to 255.
This field is only configurable if you are creating new Virtual Router, in which
case select the interface for the new Virtual Router from the menu.
Select Enable or Disable from the dropdown menu. If you select Enable, a
backup router preempts the master router if it has a priority greater than the
master virtual router's priority, provided that the master is not the owner of
the virtual router's IP address. The default is Enable.
Set the accept mode:
• Enable: The VRRP master will accept all types of data packets addressed to
IP address(es) associated with the virtual router
• Disable: The VRRP master will discard all types of data packets addressed
to IP address(es) associated with the virtual router if it is not the IP address
owner. The default is disable.
Virtual Router Redundancy Protocol (VRRP)
Unified Wired and Wireless Access System
Page 325