D-Link UWS User Manual
Viewing Interface Capability Status
The Interface Capability Status page contains information about interfaces that can have CPs associated with
them. The page also contains status information for various capabilities. Specifically, this page indicates what
services are provided through the CP to clients connected on this interface. The list of services is determined
by the interface capabilities.
The drop-down menu contains all the wired and wireless interfaces available on the switch. Each wireless
interface is identified by its wireless network number and SSID. Physical (wired) interfaces are identified by the
Port Description that includes slot number, port number, and interface type.
Use the drop-down menu to select the interface with the information to display.
Table 235
describes the fields on the Interface Capability Status page.
Parameter
Bytes Received Counter
Bytes Transmitted Counter Shows whether the interface supports displaying the number of bytes
Packets Received Counter
Packets Transmitted Counter Shows whether the interface supports displaying the number of packets
Session Timeout
Idle Timeout
Roaming Support
D-Link
Oct. 2015
Figure 274: Interface Capability Status
Table 235: Interface and Capability Status
Description
Shows whether the interface supports displaying the number of bytes received
from each client.
transmitted to each client.
Shows whether the interface supports displaying the number of packets
received from each client.
transmitted to each client.
Shows whether the interface supports client session timeout. This attribute is
supported on all interfaces.
Shows whether the interface supports a timeout when the user does not send
or receive any traffic.
Shows whether the interface supports client roaming. Only wireless interfaces
support client roaming.
Captive Portal Configuration
Unified Wired and Wireless Access System
Page 405