D-Link UWS User Manual
Command Logger Configuration
Use the Command Logger Configuration page to enable the system to log all CLI commands issued on the
system. The command log messages are interleaved with the other system logs messages.
To access the Command Logger Configuration page, click LAN > Administration > Log > Command Logger
Configuration in the navigation menu.
Field
Admin Mode
• If you change the administrative mode, click Submit to apply the change to the system.
D-Link
Oct. 2015
Figure 43: Command Logger Configuration
Table 37: Command Logger Configuration Fields
Description
This field determines whether to log CLI commands in the system log file.
• Enable: The system logs CLI commands. The commands appear in
messages on the Buffered Log page. For example, the following log
messages shows when the CLI command
issued, from which IP address the command was issued, and the name of
the user who issued the command:
<5> NOV 29 22:25:00 10.254.24.172-1 UNKN[243420816]:
cmd_logger_api.c(87) 34 %% CLI:10.254.24.65:admin:show
logging buffered
• Disable: This system does not log CLI commands.
Managing and Viewing Logs
show logging buffered
Unified Wired and Wireless Access System
was
Page 116