D-Link UWS User Manual
Syslog Configuration
Use the Syslog Configuration page to allow the switch to send log messages to the remote logging hosts
configured on the system.
To access the System Log Configuration page, click LAN > Administration > Log > System Log Configuration in
the navigation tree.
Field
Admin Status
Local UDP Port
Messages Received
Messages Dropped
Messages Relayed
• If you make any changes to the page, click Submit to apply the change to the system.
D-Link
Oct. 2015
Figure 50: System Log
Table 42: Syslog Configuration Fields
Description
Specifies whether to send log messages to the remote syslog hosts configured on the
switch:
• Enable: Messages will be sent to all configured hosts (syslog collectors or relays)
using the values configured for each host. For information about syslog host
configuration, see
"Hosts Configuration" on page
• Disable: Stops logging to all syslog hosts. Disable means no messages will be sent
to any collector/relay.
Specifies the port on the switch from which syslog messages are sent. The default
port is 514.
The number of messages received by the log process. This includes messages that are
dropped or ignored.
The number of messages that could not be processed due to error or lack of
resources.
The number of messages forwarded by the syslog function to a syslog host. Messages
forwarded to multiple hosts are counted once for each host.
Managing and Viewing Logs
119.
Unified Wired and Wireless Access System
Page 123