Siemens SINUMERIK 840D Operator's Manual page 301

9
03.04
Criterion
1. Access authorization
2. Masking filter active
3. Expert mode
4. Groups
5. All others
6. Index from to
Machine manufacturer
Machine
data
Display
options
Select all
Deselect all
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Check
If the level of access authorization is not sufficient, the MD is not displayed.
Otherwise criterion 2 is checked.
The MD is always displayed when the filter is not active.
Otherwise criterion 3 is checked.
The MD is not displayed if the expert mode bit is set
and expert mode is not selected.
Otherwise criterion 4 is checked.
If at least one group bit is both set and selected
in the masking filter, criterion 6 is checked.
Otherwise criterion 5 is checked.
If none of the group bits is set and "All others" is
selected in the masking filter, then criterion 6 is checked.
If none of the group bits is set and "All others" is
not selected in the masking filter, then the MD is not displayed.
If the index check is selected and the index of an array is within
the chosen range, then the MD is displayed.
If the index check is selected and the index of an array is not within
the chosen range, then the MD is not displayed.
Initialization
When you open a machine data window, the filter setting that matches
the area is automatically updated.
Storing filter settings
Please see information supplied by machine tool manufacturer.
Operating sequence
Press the "Machine data" softkey.
The horizontal and vertical softkey bars change.
Press the "Display options" softkey. A list of all the ranges that can be
displayed/hidden appears.
Vertical softkeys
Press the "Select all" softkey and all areas are selected.
Press the "Deselect all" softkey and no areas are selected.
Start-Up Operating Area
9.2 Display machine data
9
9-301