Siemens SINUMERIK 840D Operator's Manual page 114
Computerized
numerical control system for machine tools
Hide thumbs
Also See for SINUMERIK 840D:
- Function manual (920 pages) ,
- Diagnostics manual (714 pages) ,
- Operating turning (713 pages)
Table of Contents
Advertisement
4
Machine Operating Area
4.6 Automatic mode
Handwheel
INC
or
DRF
offset
4-114
Operating sequence
"AUTO" mode is selected in the "Machine" operating area.
The standard axis assignment is defined.
Enter the desired handwheel or select via the MCP.
Enter the desired increment or select via the MCP.
VAR
The window "DRF offset" is displayed.
Traverse the required axes using the handwheel.
Using the same operating sequence, you can also return the DRF
offset to the value "0".
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
4
03.04
Siemens AG, 2004. All rights reserved
Advertisement
Table of Contents
