Siemens SINUMERIK 840D Operator's Manual page 247

7
03.04
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
When a workpiece is selected for machining, an INI file (if
available) of the same name as the workpiece is loaded to the NC
and the main part program with the same name as the workpiece
is automatically selected.
If there is no part program/MPF with the same name, an error
message is issued and the previously selected part program
remains active.
If an INI block of the same name (e.g. for the activation of tool
data), other initialization blocks can be executed.
Example:
SHAFT.WPD is selected
SHAFT.MPF is displayed as the selected program
SHAFT.INI is loaded in the working memory of the NC
and processed
Services Operating Area
7.2 Directory structure
7
7-247