GE Sievers InnovOx Operation And Maintenance Manual page 177

Chapter 9: Troubleshooting
6414 – Dilution Water Error
Message: "The dilution water container needs attention."
Explanation: The level sensor in the dilution water container indicates that the container should be refilled.
6415 – Check Standard Error
Message: "The check standard container needs attention."
Explanation: The level sensor in the check standard container indicates that the container should be refilled.
6416 – Stream 1 Flow Error
Message: "Stream 1 flow stopped."
Explanation: Check that water is flowing in the sample cup and the inlet valve (if installed) is properly adjusted. If
the problem persists, please export the errors and contact GE Analytical Instruments for further instructions.
6417 – Stream 2 Flow Error
Message: "Stream 2 flow stopped."
Explanation: Check that water is flowing in the sample cup and the inlet valve (if installed) is properly adjusted. If
the problem persists, please export the errors and contact GE Analytical Instruments for further instructions.
6418 – Stream 3 Flow Error
Message: "Stream 3 flow stopped."
Explanation: Check that water is flowing in the sample cup and the inlet valve (if installed) is properly adjusted. If
the problem persists, please export the errors and contact GE Analytical Instruments for further instructions.
6419 – Stream 4 Flow Error
Message: "Stream 4 flow stopped."
Explanation: Check that water is flowing in the sample cup and the inlet valve (if installed) is properly adjusted. If
the problem persists, please export the errors and contact GE Analytical Instruments for further instructions.
6420 – Stream 5 Flow Error
Message: "Stream 5 flow stopped."
Explanation: Check that water is flowing in the sample cup and the inlet valve (if installed) is properly adjusted. If
the problem persists, please export the errors and contact GE Analytical Instruments for further instructions.
GE Analytical Instruments ©2013 177 of 238 DLM 68100-06 EN Rev. A