New Shopturn Program - Siemens SINUMERIK 840D sl Operating Manual

Computerized numerical controllers

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Managing programs

17.4 Creating a directory / program / job list / program list

New ShopTurn program

In the part program and workpiece directories, you can create ShopTurn programs and then

subsequently generate the machining steps for them.

Select the "Program manager" operating area.

Select the desired storage location and position the cursor on the folder

in which you would like to store the program.

Press the "New" softkey.

Press the "ShopTurn" softkey.

The "New Step Sequence Program" window opens.

The "ShopTurn" type is specified.

Enter the desired program name and press the "OK" softkey.

The program name can contain up to 28 characters (name + dot + 3-

character extension).

You can use all letters (with the exception of special characters,

language-specific special characters, Asian or Cyrillic characters),

numbers and underscores (_).

Operating Manual, 02/2012, 6FC5398-8CP40-3BA0

Sinumerik 828d turning