Tool management
16.15 Working with multitool
16.15.1
Tool list for multitool
If you work with a multitool, the tool list is supplemented by the column for the multitool
location number. As soon as the cursor is at a multitool in the tool list, certain column
headings change.
Column heading
Location
MT loc.
TYPE
Multitool name
Loc. qty.
Type distance
Figure 16-17 Tool list with multitool in the revolver
Procedure
682
Meaning
Magazine/location number
Multitool location number
Symbol for multitool
Name of the multitool.
Number of locations of the multitool.
Angle
Clearance of the multitool locations in degrees
Location number
Multitool location number
1.
Select the "Parameter" operating area.
2.
Press the "Tool list" softkey.
The "Tool List" window opens.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning