Programming technology functions (cycles)
8.5 Contour milling
Procedure
Parameters, G code program
PL
Machining plane
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Parameter
Description
Machining
Face C
surface
Face Y
(only for
Peripheral surface C
ShopTurn)
Peripheral surface Y
Position
At the front (face)
At the rear (face)
Outside (peripheral surface)
(only for
ShopTurn)
Inside (peripheral surface)
Clamp/release spindle (only for end face Y/peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for
ShopTurn)
Machining
∇ (roughing)
∇∇∇ (finishing)
Chamfering
456
1.
The part program or ShopTurn program to be processed has been
created and you are in the editor.
2.
Press the "Milling" softkey.
3.
Press the "Contour milling" and "Path milling" softkeys.
The "Path Milling" input window opens.
mm
mm
*
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
mm/min
mm/tooth
rpm
m/min
Unit
Turning