Siemens SINUMERIK 840D sl Operating Manual page 555

Opening and closing blocks
...
...
Shifting blocks
You have the option of using "Select", "Copy", "Cut-out" and "Paste" softkeys to move
individual or several blocks within the program.
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
1. Position the cursor on the desired program block.
2. Press the <+> key or the <Cursor right> key.
The block is opened.
3. Press the <-> key or the <Cursor left> key.
The block is closed again.
Multi-channel support
10.2 Multi-channel editor
555