6.3
Program structure
G_code programs can always be freely programmed. The most important commands that
are included in the rule:
● Set a machining plane
● Call a tool (T and D)
● Call a work offset
● Technology values such as feedrate (F), feedrate type (G94, G95,....), speed and
● Positions and calls, technology functions (cycles)
● End of program
For G code programs, before calling cycles, a tool must be selected and the required
technology values F, S programmed.
A blank can be specified for simulation.
See also
Blank input (Page 208)
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
direction of rotation of the spindle (S and M)
Creating a G code program
6.3 Program structure
203