Machining the workpiece
4.8 Controlling the program run
Activating program control
You can control the program sequence however you wish by selecting and clearing the
relevant checkboxes.
Display / response of active program controls:
If a program control is activated, the abbreviation of the corresponding function appears in
the status display as response.
Procedure
See also
Setting for automatic mode (Page 174)
144
1.
Select the "Machine" operating area.
2.
Press the <AUTO> or <MDA> key.
3.
Press the "Prog. ctrl." softkey.
The "Program Control" window appears.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning