Parameter
S / V
α1
Other M function
13.5.3
Straight and circular machining
13.5.3.1
Straight turning
Use this function for simple, straight machining (e.g. face or longitudinal turning).
Procedure
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Description
Spindle speed or constant cutting rate
Rotation of the coordinate system.
Input of machine functions
Refer to the machine manufacturer's table for the correlation between the meaning
and number of the function.
1.
"Manual Machine" is active.
2.
Press the "Straight circle" softkey.
3.
Select the desired straight machining and press the "All axes" softkey
- OR -
Press the softkey "Straight X α"
- OR -
Press the softkey "Straight Z α"
4.
Specify the desired value for the feedrate F.
- OR -
Press the "Rapid traverse" softkey.
The rapid traverse is displayed in field "F".
5.
Enter the target position and, if required, the angle (α) for the axis or
axes to be traversed.
Using the "Graphic view" softkey, you can toggle between the help
screen and the graphic view in the screen.
Working with Manual Machine
13.5 Simple workpiece machining
Unit
rev/min
m/min
Degrees
609