Editing A G Code Multi-Channel Program - Siemens SINUMERIK 840D sl Operating Manual

10.2.3.2

Editing a G code multi-channel program

Editing a G code multi-channel program
Precondition
● The "programSYNC" option is set.
● In order to display the machining at the counterspindle at the correct position in the
Procedure
Adding multi-channel data in a G code program
You have the possibility of adding the multi-channel cycle (CYCLE208) subsequently.
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
simulation, the linear axis of the counterspindle must be positioned before CYCLE208
(multi-channel data).
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Position the cursor in the "Workpieces" folder on a job list and press the
"Open" softkey.
Note:
If the cursor is located on a workpiece, then a search is made for a job
list with the same name.
The "Job list ..." window opens and the program assignment to the
channels is displayed.
2. Press the "OK" softkey.
The programs are displayed next to one another in the editor.
3. Position the cursor on the first block of the program (multi-channel data)
and press the <Cursor right> key.
The parameter screen "Multi-channel data" is opened.
4. Enter the required values if you wish to change cross-channel data.
Multi-channel support
10.2 Multi-channel editor
543