Notes On Use - Hitachi Compute Blade 2000 User Manual

Notes on use

Do not look directly into inside of the fibre channel port in operation. The optical module

equipped with this equipment uses laser beam. If you do, the laser beam can damage
your eyes.
Make sure to attach a port protector to any optical modules to which a fibre cable is not

connected.
See the following manuals in the "Hitachi Compute Blade Fibre Channel Switch Accessory DVD
(EN)" attached to the device.
Access Gateway Administrator's Guide

Fabric Watch Administrator's Guide

Fabric OS Administrator's Guide

Fabric OS Command Reference

Fabric OS Message Reference

Fabric OS MIB Reference

Web Tools Administrator's Guide

 Accessories
The following accessories are attached to the built-in Fibre-channel switch.
Short-wave SFP+ module

8 Gbps short-wave small form-factor pluggable plus (SFP+) modules are installed
in the module.
Each built-in Fibre-channel switch contains two or four modules. When using more
modules than those installed in each Fibre-channel switch, purchase optional
SFP+ modules.
DVD: Hitachi Compute Blade 2000 Fibre-channel Switch Accessory DVD (EN)

The attached DVD contains the manuals, MIB file, and data for maintenance.
For details, see the "Readme.txt" in the DVD.
 Powering on and off
When AC power is supplied to the Compute Blade 2000, the built-in Fibre-channel
switch is automatically turned on.
You can turn on and off each switch separately using the management module system
console command or system Web console.
DANGER!
858