Hcsm Settings - Hitachi Compute Blade 2000 User Manual

SNMP setup view HCSM settings
In the HCSM setup view, you can display and configure settings related to the
Hitachi Compute Systems Management (HCSM).
 HCSM setup view
HCSM service settings
# Item
1 HCSM
2 Port number
3 Access control
4 Account
5 Edit
Description
Shows whether HCSM is enabled or disabled.
Set as: Enable or Disable.
Port number used for HCSM.
Can be changed in the Service settings list view
> Status: Select HTTPS > Port number.
Control of access to the management module from
HCSM depending on the IP address. Set as: Enable or
Disable.
Enable: Only access from HCSM with the address shown
in HCSM server settings is available.
Account used by HCSM to connect to the management
module. No account is set by default.
Edits HCSM service settings.
742
Edit
Yes
-
> HTTP
Yes
Yes
-