Rebuilding disk arrays
The following procedure is for rebuilding disk arrays when a problem occurs on a
hard disk in a redundant disk array configuration (RAID 1, 5, 6,10).
For RAID 6, the disk array can be restored even if
two hard disks fail.
With hotspares configuration, rebuilding will work
automatically when a hard disk problem occurs.
Without hotspare configuration, rebuilding will
work automatically after you replace the faulty
hard disk in hot-plug.
The following is a procedure for manually rebuilding where an automatic rebuild did
not work.
1
Select Drives from the main menu.
The following screen appears:
381