Hitachi Compute Blade 2000 User Manual page 843

ID Level
Description: An error event has occurred in the HDD. X shows a position that the event
occurred; Y describes the event.
Action: Contact your reseller or maintenance personnel.
FD51 Information Disk has been restored to a normal level. (Location:X,Event:Y)
Description: The HDD has recovered to the normal state. X shows a position that the event
occurred; Y describes the event.
Action: None. This is a recovery message.
On management module, a warning event occurred.
FD52 Warning
(Location:X,Event:Y)
Description: A warning event has occurred in the management module. X shows a position
that the event occurred; Y describes the event.
Action: Contact your reseller or maintenance personnel.
On management module, an error event occurred.
FD53 Error
(Location:X,Event:Y)
Description: An error event has occurred in the management module. X shows a position that
the event occurred; Y describes the event.
Action: Contact your reseller or maintenance personnel.
Management module has been restored to a normal level.
FD54 Information
(Location:X,Event:Y)
Description: The management module has recovered to the normal state. X shows a position
that the event occurred; Y describes the event.
Action: None. This is a recovery message.
FD58 Warning On other module, a warning event occurred. (Location:X,Event:Y)
Description: A warning event has occurred in other than server blades, power supply
modules, cooling fan modules, switch modules, HDDs, and management modules. X shows
a position that the event occurred; Y describes the event.
Action: Contact your reseller or maintenance personnel.
The cooling fan rotation speed is abnormally high or low.
FD60 Warning
(Location:X)
Description: RPM of the cooling fan module shown in Location X indicates an improper
value.
Action: Contact your reseller or maintenance personnel.
The cooling fan rotation speed has been restored a normal level.
FD61 Information
(Location:X)
Description: RPM of the cooling fan module shown in Location X has recovered to the normal
state.
Action: None. This is a recovery message.
FD64 Warning On chassis, an AC input is lost. (Location:X)
Description: AC power is lost in the power supply module shown in Location X.
Action: Check the AC power supply. If the AC power is properly supplied, contact your
reseller or maintenance personnel.
FD65 Information On chassis, the AC input error has been corrected. (Location:X)
Description: AC power supply has recovered to the power supply module shown in Location
X.
Action: None. This is a recovery message.
FD68 Error Uncorrectable CPU error occurred. (Location:X)
Message
Description and Action
792