Backup And Restore Of Module Information - Hitachi Compute Blade 2000 User Manual

Backup and restore of module information

To protect against unexpected failure, it is recommended that you back up configuration
information. Backup information can be used for restoring the previous information when you
have changed switch modules.
Backing up configuration
A File Transfer Protocol (FTP) server is required for backing up configuration
information. Make sure that your network switch module is connected to the FTP
server.
1 Back up configuration using the FTP server.
Example: FTP server IP address: 192.168.0.42; user name: staff; password:
password
# copy startup-config
ftp://staff:password@192.168.0.42/Bakcup.config_<switch
name>_<date>
The backup configuration file, (Backup_config_<switch name>_<date>), is saved
in the FTP server by the command above.
2 Store the configuration file saved on the FTP server in media, such as FD and
USB memory, and store it in a safe place.
Restoring configuration
An FTP server is required for backing up configuration information. Make sure that
your network switch module is connected to the FTP server.
1 Restore configuration using the FTP server.
Example: FTP server IP address: 192.168.0.42; user name: staff; password:
password
# copy
ftp://staff:password@192.168.0.42/Bakcup.config_<switch
name>_<date> startup-config
The backup configuration file is reflected to startup-config by the command above.
2 Perform "reload" to reflect the configuration to the switch module.
# reload
<= Press [Enter].
<= Press [Enter].
<= Press [Enter].
846