Save Configuration Changed On Lpar Manager Screen - Hitachi Compute Blade 2000 User Manual

Save configuration changed on LPAR
manager screen
To save settings you have made or changed on LPAR manager screens, go to the LPAR
manager Menu screen and press F9: Save Configuration. The guest timer settings
changed on the guest OSs also need to be saved by F9 after the change before the LPAR
manager shutdown or reboot; otherwise, the changed values might be lost.
Example of pressing F9: Save Configuration on the LPAR manager Menu screen:
A subscreen is displayed, showing that LPAR manager configuration is being saved.
+------------------------------------------------------------------------------+
|+-- Menu [LP_192168020] ---------------------------- 2009/02/18 11:23:00 -+ |
||
|| Logical Partition Configuration
|| Logical Processor Configuration
|| Physical Processor Configuration
|| PCI Device Information
|| PCI Device Assignment
|| VNIC Assignment
|| Shared FC Assignment
|| Allocated FC Information
||
|+----------------------| Saving LP configuration ... |----------------------+ |
|
|+-- Tips -------------------------------------------------------------------+ |
|| F3 : Activate
|| F4 : Deactivate
|| F5 : Reactivate
|| F6 : Add Definition
|| F7 : Remove
|+---------------------------------------------------------------------------+ |
| System Configuration
+------------------------------------------------------------------------------+
| :Move Cursor Enter:Select
+------------------------------------------------------------------------------+
System Configuration
System Service State
Date and Time
LP Options
LPAR Usage
Front Panel
LP System Logs
Firmware Version Information
+------------------------------+
+------------------------------+
F8 : LPAR Screen
F9 : Save Configuration
Alt + t : Screen Refresh
Alt + r : LP System Shutdown
LP Ver. : VV-RR(TT-KK)
1088
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
| |
| |
| |
| |
| |
|
|