Hitachi Compute Blade 2000 User Manual page 295

Check the Firmware Version in the following screen to find your disk array
4
controller firmware version.
See the following table to find your firmware version and
lead-in phrase which includes the firmware version,
Firmware version
2.110.63-1184
2.120.233-1474
 Starting and ending MegaRAID WebBIOS
Use the following procedure to start the MegaRAID WebBIOS.
1 Turn on the power supply to the system equipment.
When the following screen appears, press and hold the Ctrl key and press the
2
H key.
The MegaRAID WebBIOS is started.
LSI MegaRAID SAS-MFI BIOS
Version x.xx.xx (Build xxx xx, xxxx)
Copyright(c) 2008 LSI Corporation
HA -0 (Bus x Dev x) MegaRAID SAS 8708 ERI
FW package: x.x.x-xxxx
x Virtual Drive(s) found on the host adapter.
x Virtual Drive(s) handled by BIOS
Press <Ctrl><H> for WebBIOS
If the operating system was started before you press the keys, shutdown the
operating system and restart the system equipment. Check the manual for
ending your operating system because some operating systems, such as
Windows, require shutdown and other special operations when the particular
operating system is terminated.
Lead-in phrase
Firmware version; 2.110.63-1184
Firmware version; 2.120.233-1474 (or later)
244