NEC Express5800 120Rj-2 User Manual page 334

User Guide
[When PROSet is not installed]
1. The [Local Area Connection Properties] dialog box is displayed.
■ Procedure with the standard start menu: click Start menu, [Control
■ Procedure with the classic start menu:
a. Click Start menu, Click [Settings] and Click [Network Connections].
b. Right-click [Local Area Connection] and click [Properties] from pop-
2. Click [Configure].
The property dialog box for the network adapter is displayed.
3. Click [Advanced] and specify the same value for [Link Speed & Duplex] and
for the HUB.
4. Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1. The [Intel PROSet] dialog box appears.
* Procedure with the standard start menu
* Procedure with the classic start menu
a. Click Start menu, point to [Settings] and click [Control Panel].
b. Click [Administrative tools].
c. Click [Computer Management] and double click the [(Network Adapter
2. Click [(Network Adapter Name)] in the list.
3. Click the [Link] and specify the [Speed & Duplex] value the same as the value
specified for HUB.
4. Click [Apply] and click [OK].
You can also add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which
can be displayed from [Network and Dial-up Connection].
[AddingServices]. [Network Monitor] can monitor the frame (or
the packet) that the computer installing [Network Monitor] sends
or receives. This tool is valuable when analyzing network
trouble.
Panel], [Network Connections], and [Local Area Connection].
The [Network Connections] dialog box is displayed.
up menu.
Click Start menu, point to [Control Panel], [Administrative tools], and
click [Computer Management] and then double click the [(Network
Adapter Name)] in the Network Adapter list.
Name)] in the Network Adapter list.
Note: We recommend you add [Network Monitor] at
334
www.nec-computers.com