User Guide
■
Be sure to use the screws provided with the backup device.
■
Position the backup device so that the device screw holes
align with the screw holes in the device carrier.
■
If you find it difficult to connect the cable of a long device,
slide the device to the front in order to connect the cable.
11. Connect the power cable and interface cable to the device.
Figure 149: Connecting the Cables to the Backup Device
power cable to the power connector on the device.
12. Insert the device carrier into the backup device bay halfway.
when inserting the device carrier.
Notes:
A: Power cable
B: IDE cable
Note: Connect the connector marked with "TAPE" of the
Figure 150: Inserting the Backup Device Carrier
Note: Be careful not to damage the connected power cable
A
B
193
www.nec-computers.com