User Guide
7. While pulling the lever toward the right side of the server, pull the optical disc
drive out of the chassis.
■
Do not touch any other part than release lever when remov-
ing the optical disc drive or your fingers may get caught.
■
When an optional USB floppy disk drive is installed, pull the
device carrier half-way out, and disconnect the USB cable.
Pulling the device carrier completely out while the USB cable
being connected may damage the USB connector.
8. While pushing the latching tab that secures the device bay, push the device
carrier out of front of the server.
Figure 171: Unlocking the Backup Device Carrier
Figure 170: Removing the Optical Disc Drive
Caution
203
www.nec-computers.com