System Menu Option 20, Door And Floor Groups - GE AL-1103 User Manual

4. If you have entered an individual camera
number, the keypad displays the film count
(Figure 92).
5. Enter the new frame count number and press
ENTER to change the film count and return
to the original display.
6. Table 28 lists the reset camera options.
Table 28. Reset camera options
Option
Reset the frame count for all cameras to zero.
Display the frame count of an individual camera.
Exit this menu option.
Exit the menu option and return to the original display.

System menu option 20, Door and floor groups

Use this menu to select and program door and floor groups.
Each door group contains a list of all doors (64 doors) and the time zone for each door within the group.
Authorized access is only valid during the time zone.
Program door groups
To program door groups, do the following:
1. Press MENU* Figure 1).
2. Enter your user PIN code, and press ENTER
Figure 1).
3. Enter 20 and press ENTER. The keypad
displays the program doors groups opening
window (Figure 93).
4. Enter 1 and press ENTER. The keypad
displays the program doors groups opening
window (Figure 94).
Figure 92. Display film count
Film Counts: 1:0123
Film Count:
Action
Enter 0 and press ENTER.
Enter the camera number and press ENTER.
Press MENU*.
Press CLEAR.
Figure 93. Program door groups opening screen
Groups 1-Doors 2-Floors
Option:
Figure 94. Enter door group number
Door Groups
Group No:
Chapter 2
Alliance system menu
57