GE AL-1103 User Manual page 53

Create or change a user
To create or change a user, do the following:
1. Press MENU* Figure 1), enter your user
PIN code, and press ENTER Figure 1).
2. Enter 14 (for menu 14) and press ENTER.
The keypad displays the create or change a
user window (Figure 65).
3. Enter 3 and press ENTER to create a user
(Figure 66).
4. Enter the system user number (card number)
and press ENTER. The display shows the
user's alarm group (Figure 67).
Note: You cannot assign an alarm group to a
user unless the alarm group has the option
"Can This Alarm Group Be Assigned to
Users" set to YES, and your alarm group
has all the "Areas" and "User Menu
Options" of the alarm group you wish to
assign. If the alarm group you wish to
assign has "Alarm System Control" and
"Modem Access" set to YES, then your
alarm group must also have these options
set to YES.
5. The next display shows the user's door group
(Figure 68).
Card users must always have a valid door
group assigned in order to perform alarm
control or door functions.
6. Enter the door group number to be assigned
to the user and press ENTER.
7. The next display shows the user's floor
group (Figure 69).
8. Press ENTER to move to the next display.
Figure 65. Create or change a user
1-Delete 2-Display 3-Create 4-Total
Option:
Figure 66. Create a user
Create User
User No:
Figure 67. User alarm group
*-View, Alm Grp:1-No Access
Alarm Group:
Figure 68. User group door number
Door Group: 0
Door Group:
Figure 69. User floor group
Floor Group: 0
Floor Group:
Chapter 2
Alliance system menu
47