GE AL-1103 User Manual page 60

54 Alliance System
User Manual
9. The display shows the day to start DST
(Figure 83).
10. Enter one of the following:
• 1 = DST ends on first Sunday of the
month
• 2 = DST ends on the second Sunday of
the month
• 3 = DST ends on the third Sunday of the
month
• 4 = DST ends on the fourth Sunday of
the month
• 5 = DST ends on the last Sunday of the
month
11. Press ENTER, ENTER
12. The display shows the end month DST
(Figure 84).
13. Enter the month to end DST (2 digits)
14. Press ENTER, ENTER.
Adjust the internal clock for correct timings
To adjust the internal clock for correct timings, do the following:
1. Press MENU* Figure 1), enter your user
PIN code, and press ENTER Figure 1). The
keypad displays the adjust internal clock
window (Figure 85).
2. Enter 15 (for menu 15) and press ENTER.
3. Enter 4 and press ENTER to change the
daily adjustment (Figure 86).
4. Press MENU* to change between + (add)
and – (subtract).
5. Enter the correct number of seconds to add
or subtract.
6. Press ENTER to accept the display.
Figure 83. DST start day
5-Last Sunday, Month 00
End Day:
Figure 84. DST end month
5-Last Sunday, Month 00
End Month:
Figure 85. Adjust internal clock
Time 1-Display,2-Set,3-DST,4-Adjust
0-Exit, Menu:
Figure 86. Daily clock adjustment
Daily Adjustment (Sec): +0
*-Change, Sec: