Yamaha 2007 XP500 Service Manual page 85

1. Cooling system air bleed hose
2. Storage box light switch lead
3. Coolant reservoir hose
4. Spark plug lead #2
5. Radiator fan motor lead
6. Sidestand switch lead
7. Spark plug lead #1
8. Rear brake lock lever cable
9. Rear brake hose
10. Speed sensor lead
A. Pass the rear brake lock lever cable on the front
side of throttle cable.
B. Position of clamp.
C. Position the relay straighten.
D. Fasten the cooling system air bleed hose to the
stay 1 with a plastic holder.
E. The main switch lead couplers should not pro-
trude to the outside of the frame.
F. Fasten the fuel injector leads with the plastic
holder.
G. Fasten the sidestand switch lead to the frame
with a plastic holder.
H. Fasten the rear brake hose to the stay 1 with a
plastic holder.
I. Route the throttle cable through the cable
holder.
J. Route only the main switch lead onto the cowl-
ing stay pipe.
2-48
CABLE ROUTING