Yamaha 2007 XP500 Service Manual page 289

2. Tighten:
Swingarm bolt
G
Swingarm bolt
40 Nm (4.0 m•kg, 29 ft•lb)
3. Adjust:
Pivot shaft
G
Nut
G
Pivot shaft
7 Nm (0.7 m•kg, 5.1 ft•lb)
Nut
100 Nm (10.0 m•kg, 72 ft•lb)
NOTE:
With your fingers, screw in the pivot shaft until
G
it touches the collar and then tighten the pivot
shaft to the tightening torque.
Tighten the nut to the tightening torque.
G
Install the shock absorber and rear wheel after
G
the swingarm is installed.
4. Fill:
Chain drive oil
G
5. Check:
Chain drive oil level
G
Refer to "CHECKING THE CHAIN DRIVE
OIL LEVEL" on page 3-26.
CHAIN DRIVE TRANSMISSION
5-76