Duke Energy H?M Energy Manager Homeowner's Manual page 8

Step 2: Main Menu and Thermostat Settings (continued)
5. Press the
advance the display to
RESET WI-FI .
®
STEP 2: Connect to a Wireless Internet Network
In the configuration mode, the HōM™ Energy Manager thermostat acts like a wireless Internet access point. This
allows the homeowner to use any wireless Internet-enabled device to connect to the thermostat and configure it to
use their Wi-Fi settings with a standard Web browser.
®
NOTE: If any settings on your wireless Internet router are changed at any time during this step, you must cycle the
power to your thermostat and restart this procedure.
1. On the thermostat Main Menu
screen, press the Menu button.
3. Press the Select button.
If you continue to have connectivity problems, please call the HōM Energy Manager customer service center
at 800.956.8825.
HōM™ Energy Manager Web-Programmable Thermostat Homeowner's Manual
button to
HōM Energy Manager Portal
homenergymgr.com/portal/engagement
6. As RESET WI-FI is flashing,
®
press the Select button.
2. Press the Other button. The
thermostat will display the
WI-FI ® SETTINGS menu.
4. The message area of the
thermostat will display
THERMOSTAT followed by
the last four digits of the
thermostat's Wi-Fi module
®
serial number. This is the
network name (SSID) you
will use to connect to the
thermostat.
8