Duke Energy H?M Energy Manager Homeowner's Manual page 3

Your Duke Energy HōM™ Energy Manager thermostat controls your central air conditioning and heating system. The types of
compatible systems include:
Central Air Conditioners:
• Single-Stage
• Multi-Stage
IMPORTANT
All programming functions are available through the Duke Energy HōM Energy Manager Portal. The "7-Day/4-Interval"
programming function cannot be done manually at the thermostat. It can only be done through the HōM Energy Manager
Portal.
You may enter the HōM Energy Manager Portal from anywhere you have Web access, using your smartphone, tablet,
or computer. You may manually use the thermostat to raise or lower the temperature in your home, and set all other HVAC
features. For details on programming through the HōM Energy Manager Portal, please see your Welcome to Duke Energy
H ō M Energy Manager brochure or visit duke-energy.com/homenergymgr.
All compatible components are connected and configured by the HōM Energy Manager technician during installation.
*If you have a heat pump, make sure your settings are no more than 2 degrees between the warmest temperature (the
one you set when you are home) and coolest temperature (the one you set when you are away). Large temperature
differences may enable the auxiliary heating mode and potentially cause your electric bill to increase significantly in the
fall and winter months.
HōM™ Energy Manager Web-Programmable Thermostat Homeowner's Manual
Heat Pump*: Furnaces:
• Single-Stage • Single-Stage Gas or Oil
• Multi-Stage • Multi-Stage Gas or Oil
• Single-Stage Electric
• Multi-Stage Electric
• Two-Wire Hydronic
• Millivolt Heat System
HōM Energy Manager Portal
homenergymgr.com/portal/engagement
Aux Heat:
• Single-Stage Electric
• Multi-Stage Electric
3