Duke Energy H?M Energy Manager Homeowner's Manual page 9

Step 2: Main Menu and Thermostat Settings (continued)
5. Use a Wi-Fi -enabled
®
smartphone, tablet, or computer
to connect to the thermostat.
Open the Wi-Fi
on your device and select the
THERMOSTAT name displayed
in step 4.
7. Open the web browser on your device. If your browser is set to automatically open
a Web page, the IntelliTEMP configuration page should automatically appear.
8. If the settings page does not appear after a few seconds, type "directlink/settings"
in the address bar, then press ENTER. If the settings page still does not appear,
on the thermostat Main Menu screen, press the button next to Menu. Then
press the button next to Other. The thermostat will display the WI-FI
SETTINGS menu. Press the button next to Select. The message area of the
thermostat will display the Wi-Fi
currently connected. Press the button next to Next. The IP Address of your
device will be displayed in the thermostat's message area. In the browser bar of
your device, type "http://" followed by the IP address displayed on the
thermostat. Press ENTER.
9. Use the pull-down on
the settings page to
select your home
network name.
11. Enter the network password for your network.
12. Once all fields are filled in correctly, click on the Save button.
HōM™ Energy Manager Web-Programmable Thermostat Homeowner's Manual
settings menu
®
network name (SSID) to which you are
®
HōM Energy Manager Portal
homenergymgr.com/portal/engagement
6. You may receive a notification
that you are connected to a
non-secure network. Select OK
or CONTINUE.
®
10. If your wireless
Internet router is set
to hide the network
name or your network
is not listed in the
pull-down, click on the
link below the pull-
down to display the
manual settings page.
9