GE MapSight User Manual page 82

Storing your MapSight for more than two weeks:
To store the device safely for longer than two weeks, follow these steps:
1. Back up your data.
2. Press the Task Manager button
3. Charge the battery pack to full capacity (100%).
4. Unplug the wall charger. Press the Power button until the Power Button menu appears.
5 . Select P o w e r O ff from the menu, and then tap O K .
6. Place your MapSight in a safe, dry place.
Taking your MapSight out of extended storage: The battery pack discharges slightly during
extended storage periods. When you are ready to use your MapSight again, follow these steps so
your battery pack runs efficiently:
Plug your MapSight into a charger.
Charge the battery pack. (To check the battery power status, tap on the battery icon at
the top of the screen.)
Only charge the battery pack in temperatures between 32°F and 104°F (0°C and 40°C). For
best results, charge the battery pack at room temperature (68°F or 20°C)
Protecting the touchscreen
Protect the touchscreen from impact, pressure, or abrasive substances that could damage it.
To further protect the touchscreen, a tested screen protector accessory is available from your
MapSight reseller.
CAUTION : Be sure to replace the screen protector as often as the screen protector
manufacturer packaging directs.
To apply a screen protector, follow these steps:
1. Make sure your MapSight is free of oils and dirt. You can wipe it with a microfiber cloth.
2. Fit the screen protector onto your MapSight screen in accordance with the supplied installation
instructions.
3. Smooth the screen protector while peeling back the liner, working out air bubbles as you go.
Continue smoothing until the liner is removed.
Note: Some air bubbles may still be visible, but they fade away in a short time. You can
use a credit card to gently push out any excess air.
Protecting your MapSight against mechanical shock
MapSight is designed for protection from mechanical shock. It has been test-dropped from five
feet (1.524m) onto concrete. Shock protection is guaranteed only when the entire body molding
(including SD Card cover and Connector protector) is securely in place.
MapSight U ser M anual
MS-101-14-12-34.0
to close all running application programs.
Page 7 8 www.gemapsight.com/support