GE MapSight User Manual page 132

The default screen in Wireless Manager shows the
power status, the Done soft key, and the Menu soft key
(see the following figure).
The Bluetooth bar acts as a toggle switch, allowing you turn the device Off or On easily. If you
make the device visible to other devices, the toggle switches between Off and Visible. Tapping
on the Done soft key closes the Wireless Manager screen.
Tapping on the Menu soft key takes you to the Bluetooth
Settings screen, shown in the next image. From here, you can
adjust Bluetooth settings, such as turning Bluetooth on or off
and creating a Bluetooth partnership. See the following sections
for more details.
Turn Bluetooth on and off
1. Tap Start > Settings > Connections tab.
2. Tap Bluetooth.
3. Select or clear the Turn on Bluetooth check box. Selecting it turns Bluetooth on; clearing it
turns it off.
Note: By default, Bluetooth is turned off. If you turn Bluetooth on and then suspend the
device, Bluetooth turns off while MapSight is suspended to save battery power. When you
resume (turn on) MapSight, Bluetooth turns on automatically.
Make MapSight visible to another device
To allow other devices that use Bluetooth wireless technology to detect MapSight and
communicate with it, you must make your device visible or establish a partnership with the
other Bluetooth device.
Follow these steps to make your device discoverable:
1. Tap Start > Settings > Connections tab.
2. Tap Bluetooth.
3. Select the Turn on Bluetooth checkbox, and then select the checkbox to 'Make this device visible
to other devices'.
MapSight U ser M anual
MS-101-14-12-34.0
Bluetooth toggle bar
Menu soft key
Done soft key
Page 1 28 www.gemapsight.com/support