Data Settings - GE MapSight User Manual

Data Settings

This screen allows you to view and change the top-level Data
Folder where MapSight stores its Job sub-folders. The default
'Current Data Folder:' directory is \SD Card\
Data Folder shows the 'Current Data Folder:'
Tap the [Browse] button in the Data Folder box to show the
directory browser dialog. Use the folder tree view to browse and
select the required folder. Tap [Save] or [ok] to update the data
folder, or tap [Cancel] to not change the 'Current Data Folder:'
WARNING! The Data Folder path must be a valid existing
folder on your MapSight unit to correctly record captured
data.
Note: While it is possible to store captured data in MapSight
internal memory, it is recommended that data be stored on
an inserted SD card.
The XML for each Image setting allows the user to enable or
disable the generation of an XML file for each photo captured. This
option is not enabled by default.
MapSight U ser M anual
MS-101-14-12-34.0
Page 3 2 www.gemapsight.com/support