GE MapSight User Manual page 139

5. In the Devices tab, choose New Partnership.
6. Select your cell phone from the list of devices and tap Next.
7. Enter any passkey on your MapSight.
8. Enter the same passkey and any other requested information on your cell phone.
9. On your MapSight, select Dialup Networking, then tap Next.
10. Tap Start > Settings > Connections tab > Connections.
11. Choose Add a new modem connection.
12. Enter a name for the connection and select Bluetooth as the modem.
13. Tap Next.
14. Select the name of your cell phone, then tap Next.
15. Enter the phone access number according to your phone carrier
16. Enter a user name, password, and domain as specified by your network administrator.
17. Tap Advanced.
18. Fill in the remaining boxes as appropriate. Tap OK when you are done.
19. Tap Finish. Now you should be able to connect to the Internet on your MapSight through your
s
phone' dialup connection.
Connecting to the Internet using a cordless modem
To connect to the Internet using a cordless modem, follow the steps below:
1. Tap on the Bluetooth icon on the Today screen to open Wireless Manager. Make sure
Bluetooth is on. (See the previous section for details.)
2. Tap Menu > Bluetooth Settings.
3. In the Mode tab, make sure Turn on Bluetooth is selected and that Make the device
discoverable to other devices is deselected.
4. Open the Devices tab and choose New Partnership.
5. When the cordless modem device is found, tap on it.
6. Enter the passkey.
7. In the Partnership Settings screen, make sure Serial Port is not selected and that Dialup
Networking is selected.
8. Tap Save.
9. Tap once on the device name to select it.
10. Tap Start > Settings > Connections tab > Connections.
11. Choose Add a new modem connection.
12. Enter a name.
13. Select Bluetooth as the modem.
14. Tap Next.
15. Select the name of the modem and tap Next.
16. Enter your ISP number as provided by your ISP provider and tap Next.
17. Type in a user name and password.
18. Choose Advanced.
19. Change the baud rate to 115200.
20. Fill in the remaining boxes as appropriate. Click OK when you
21. Tap Finish.
MapSight U ser M anual
MS-101-14-12-34.0
'
re done.
Page 1 35
'
s specifications. Tap Next.
www.gemapsight.com/support