GE MapSight User Manual page 22

Charging your Battery
Charging Time
Charge a discharged battery pack from 4 to 6 hours or until the charge indicator LED turns green to
indicate full charge.
Charging temperatures
Only charge your battery pack in temperatures between 32°F and 113°F (0°C and 45°C). For best
results, charge the battery pack at room temperature (68°F or 20°C).
WARNING! Misusing the battery pack may cause it to overheat, rupture, or ignite and
cause serious injury. Be sure to follow these safety rules:
Do not heat the battery pack or place it in fire or direct sunshine.
•
Do not install the battery pack backwards.
•
Do not connect the battery terminals with any metal object (such as wire). Do not solder
•
onto the battery pack.
Do not disassemble or modify the battery pack.
•
In the rare event that the battery pack leaks and fluid gets into the eye, do not rub the
•
eye. Rinse well with water and immediately seek medical care. Your MapSight will
naturally pick up a magnetic signature over time that may affect the accuracy
MapSight U ser M anual
MS-101-14-12-34.0
Page 1 8 www.gemapsight.com/support