GE MapSight User Manual page 55

The default tasks for the Photo Only MapSight Tool will be
shown. A red star will indicate the mandatory tasks.
Tap the Photo Only task to start the video preview screen.
To use this mode, aim the MapSight to compose your scene as
required.
Tap the Next button.
The camera will click, and depending on camera settings, will
revert to the Photo Only selection screen. Where there is a
successful recording a green tick will appear alongside the task.
From here the information can be abandoned (tap the Home
button), retaken (tap Photo Only again to delete the photo and
re-enter the video preview), and data entered into non-
mandatory Label and Comment fields.
Tap the Label task button to enter the Label entry screen.
Tap the Comment task button to enter the Comment entry
screen.
Tap the Save button to save the target without
Label/Comments recorded.
Tap the Home button to abandon the target and delete the
recorded data.
Refer to the Target Position MapSight Tool for instruction on adding Label and Comment
MapSight U ser M anual
MS-101-14-12-34.0
Page 5 1 www.gemapsight.com/support