Parameters For "Control Function = Heating - ABB -i-Bus-KNX Millenium Technical Reference Manual

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
11.3.2

Parameters for "Control function = Heating"

General parameters for "Control
function = Heating"
Additional heating stage
Parameters for "Setting operating
modes"
Operating mode after reset
General parameters for "Set values"
Send current set value
cyclical sending of the current setpoint
temperature (min)
Setpoint temperatures for operating modes
KNX Technical Reference Manual | 1473-1-7819
Settings
• deactivated
• activated
Settings
• Standby
• Comfort
• ECO mode
• Frost/heat protection
Settings
• cyclical and for a change
• only cyclical
1 ... 120
• Dependent
• individual
Description of applications /
Comments
–
Comments
–
Comments
–
–
–
objects
— 30 —