ABB -i-Bus-KNX Millenium Technical Reference Manual page 45

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
Note
The following parameters are available only when parameter "Control type heating" or "Control
type cooling" is set on "PI continuous", "PI PWM (1-bit)" or "FanCoil".
General parameters for "Control
function = Heating"
Status object heating
Control type heating
Mode of the control value for heating
Hysteresis heating (1/10 K)
cyclical sending of the control value heating
(min)
General parameters for "Control
function = "Cooling"
Status object cooling
Control type cooling
Mode of the control value for cooling
Hysteresis cooling (1/10 K)
cyclical sending of the control value cooling
(min)
KNX Technical Reference Manual | 1473-1-7819
Settings
• deactivated
• activated
• 2-point 1-bit (Off/On)
• 2-point 1-byte (0/100%)
• PI continuous
• PI PWM (1-bit)
• FanCoil
• Normal
• inverse
3 ... 255
1 ... 60
Settings
• deactivated
• activated
• 2-point 1-bit (Off/On)
• 2-point 1-byte (0/100%)
• PI continuous
• PI PWM (1-bit)
• FanCoil
• Normal
• inverse
3 ... 255
1 ... 60
Description of applications /
Comments
–
–
–
Only available when parameter "„Control
type heating" is set on "2-point 1-bit
(Off/On)" or "2-point 1-byte (0/100%)".
–
Comments
–
–
–
Only available when parameter "„Control
type cooling" is set on "2-point 1-bit
(Off/On)" or "2-point 1-byte (0/100%)".
–
objects
— 45 —