ABB -i-Bus-KNX Millenium Technical Reference Manual page 35

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
Note
The following parameters are available only when parameter "Additional heating stage" is set on
"activated".
Additional parameters for "Control
function = Heating"
Output additional stage heating
Mode of the control value of the additional
stage heating
Temperature difference additional stage
heating (x 0,1K)
upper hysteresis of the additional stage
heating (x 0,1K)
cyclical sending of the control value
additional stage heating (min)
KNX Technical Reference Manual | 1473-1-7819
Settings
• 2-point 1-bit (Off/On)
• 2-point 1-byte (0/100%)
• Normal
• inverse
0 ... 255
0 ... 255
1 ... 60
Description of applications /
Comments
–
–
–
–
–
objects
— 35 —