ABB -i-Bus-KNX Millenium Technical Reference Manual page 34

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
Note
The following parameters are available only when parameter "Control type heating" is set on
"FanCoil".
Additional parameters for "Control
function = Heating"
send automatic switch-off
Manual operation of fan stage
manual switching for frost
Number of fan stages
Evaluation stage status
Position output
Format of the stage output
Control value output for fan stage 1 heating
(0 - 255)
Control value output for fan stage 2 heating
(0 - 255)
Control value output for fan stage 3 heating
(0 - 255)
Control value output for fan stage 4 heating
(0 - 255)
Control value output for fan stage 5 heating
(0 - 255)
Jump-back active, if fan for heating off
Fan stage limit heating for ECO mode
max. fan stage heating for ECO mode
Timeout for fan heating (min)
KNX Technical Reference Manual | 1473-1-7819
Settings
• deactivated
• activated
• Automatic On / Off
• Manual On/Off
• deactivated
• activated
• 3 steps
• 5 steps
• deactivated
• activated
• only manuel
• manual and auto
• 0 ... 5
• 0 ... 255
• 1-bit m of n
• 1-bit 1 of n
0 ... 255
0 ... 255
0 ... 255
0 ... 255
0 ... 255
• deactivated
• activated
• deactivated
• activated
0 ... 5
1 ... 360
Description of applications /
Comments
–
–
–
–
–
–
–
–
–
–
Only available when parameter "Number of
fan stages" is set on "5 steps".
–
–
Only available when parameter "Fan stage
limit heating for ECO mode" is set on
"activated".
–
objects
— 34 —