Monitor Images On A Pc; Monitor Images From A Single Camera - Panasonic TC0938450-015CE Operating Instructions Manual

1 Monitor images on a PC

The following are descriptions of how to monitor images from the camera on a PC.
1.1

Monitor images from a single camera

1.
Start up the web browser.
Enter the IP address designated using the Panasonic "IP Setting Software" in the address box of the
2.
browser.
 Example when entering an IPv4 address: http://URL registered using IPv4 address
http://192.168.0.10/
 Example when entering an IPv6 address: http://[URL registered using IPv6 address]
http://[2001:db8::10]/
<Example of IPv4 access>
<Example of IPv6 access>
IMPORTANT

When the HTTP port number is changed from "80", enter "http://IP address of the unit + : (colon)+ port
number" in the address box of the browser. (Example: http://192.168.0.11:8080)

When the PC is in a local network, configure the proxy server setting of the web browser (under [Internet
Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.
Note

Refer to section 13.3 for further information about the case in which "HTTPS" is selected for "HTTPS" -
"Connection" on the [Network] tab of the "Network" page (section 13).
3.
Press the [Enter] key on the keyboard.
 The "Live" page will be displayed. Refer to section 1.2 for further information about the "Live" page.
1 Monitor Images on a PC
Operating Instructions 7