Configure The Settings Relating To The Ftp Server [Ftp] - Panasonic TC0938450-015CE Operating Instructions Manual

[Authentication]

Type
Select the authentication method to send E-mails from the following.
–
None: It is not necessary to clear any authentication to send E-mails.
–
POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP server
to send E-mails.
–
SMTP: It is necessary to clear the SMTP server authentication to send E-mails.
–
Default: None
Note When you don't know the authentication method to send E-mails, refer to the network administrator.

User name
Enter the user name to access the server.
–
Available number of characters: 0 - 32 characters
–
Unavailable characters: " & : ; \
–
Default: None (blank)

Password
Enter the password to access the server.
–
Available number of characters: 0 - 32 characters
–
Unavailable characters: " &
–
Default: None (blank)
[Sender's E-mail address]
Enter the E-mail address of a sender.
The entered E-mail address will be displayed in the "From" (sender) line of the sent E-mails.

Available number of characters: 3 - 128 characters

Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_),
and the hyphen (-).

Default: None (blank)
12.2 Configure the settings relating to the FTP
server [FTP]
Click the [FTP] tab on the "Server" page. (section 6)
The settings relating to the FTP server used to transmit the alarm images can be configured on this page.
[FTP server address]
Enter the IP address or the host name of the FTP server.

Available number of characters: 1 - 128 characters

Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and
the hyphen (-).

Default: None (blank)
12 Configure the settings of the servers [Server]
Operating Instructions 53