Configure The Settings Relating To Panasonic Alarm Protocol [Notification] - Panasonic TC0938450-015CE Operating Instructions Manual

10 Configure the alarm settings [Alarm]
–
Default: None (blank)
To delete the registered address, click the [Delete] button respective to the desired address.
[E-mail subject]
Enter the E-mail subject.

Available number of characters: 0 - 50 characters

Default: None (blank)
[E-mail body]
Enter the E-mail body.

Available number of characters: 0 - 200 characters

Default: None (blank)
10.5 Configure the settings relating to Panasonic
alarm protocol [Notification]
Click the [Notification] tab on the "Alarm" page. (section 6)
The settings relating to Panasonic alarm protocol can be configured in this section.
Panasonic alarm protocol notification
[Panasonic alarm protocol]
Select "On" or "Off" to determine whether or not to provide notification by Panasonic alarm protocol according to
the settings for the "Alarm" and "Diag." checkboxes of "Destination of notification" below.

When an alarm is detected ("Alarm")

When a video loss is recovered ("Alarm")
–
Default: Off
Note

When "On" is selected, notification of the alarm occurrence will be provided to the registered destination
server addresses in order (to IP address 1 first, to IP address 8 last).
46 Operating Instructions